GMOクラウド ALTUSアルタス Isolateシリーズでご利用いただける、Rocky Linux 8.10パッケージ一覧

Rocky Linux 8.10パッケージ一覧

  • NetworkManager.x86_64 1:1.40.16-15.el8_9 @baseos
  • NetworkManager-config-server.noarch 1:1.40.16-15.el8_9 @baseos
  • NetworkManager-libnm.x86_64 1:1.40.16-15.el8_9 @baseos
  • NetworkManager-team.x86_64 1:1.40.16-15.el8_9 @baseos
  • NetworkManager-tui.x86_64 1:1.40.16-15.el8_9 @baseos
  • PackageKit.x86_64 1.1.12-7.el8 @appstream
  • PackageKit-glib.x86_64 1.1.12-7.el8 @appstream
  • abattis-cantarell-fonts.noarch 0.0.25-6.el8 @AppStream
  • acl.x86_64 2.2.53-3.el8 @baseos
  • adcli.x86_64 0.9.2-1.el8 @baseos
  • alsa-sof-firmware.noarch 2023.09.2-1.el8 @baseos
  • at.x86_64 3.1.20-12.el8 @anaconda
  • attr.x86_64 2.4.48-3.el8 @anaconda
  • audit.x86_64 3.1.2-1.el8 @baseos
  • audit-libs.x86_64 3.1.2-1.el8 @baseos
  • authselect.x86_64 1.2.6-2.el8 @baseos
  • authselect-compat.x86_64 1.2.6-2.el8 @appstream
  • authselect-libs.x86_64 1.2.6-2.el8 @baseos
  • avahi-libs.x86_64 0.7-27.el8 @baseos
  • basesystem.noarch 11-5.el8 @anaconda
  • bash.x86_64 4.4.20-5.el8 @baseos
  • bash-completion.noarch 1:2.7-5.el8 @anaconda
  • bc.x86_64 1.07.1-5.el8 @anaconda
  • bind-export-libs.x86_64 32:9.11.36-14.el8_10 @baseos
  • bind-libs.x86_64 32:9.11.36-14.el8_10 @appstream
  • bind-libs-lite.x86_64 32:9.11.36-14.el8_10 @appstream
  • bind-license.noarch 32:9.11.36-14.el8_10 @appstream
  • bind-utils.x86_64 32:9.11.36-14.el8_10 @appstream
  • binutils.x86_64 2.30-123.el8 @baseos
  • biosdevname.x86_64 0.7.3-2.el8 @anaconda
  • blktrace.x86_64 1.2.0-10.el8 @anaconda
  • bolt.x86_64 0.9.1-1.el8 @anaconda
  • bpftool.x86_64 4.18.0-553.el8_10 @baseos
  • brotli.x86_64 1.0.6-3.el8 @anaconda
  • buildah.x86_64 2:1.33.7-1.module+el8.10.0+1825+623b0c20 @appstream
  • bzip2.x86_64 1.0.6-26.el8 @anaconda
  • bzip2-libs.x86_64 1.0.6-26.el8 @anaconda
  • c-ares.x86_64 1.13.0-10.el8 @baseos
  • ca-certificates.noarch 2023.2.60_v7.0.306-80.0.el8_8 @baseos
  • cairo.x86_64 1.15.12-6.el8 @AppStream
  • cairo-gobject.x86_64 1.15.12-6.el8 @AppStream
  • checkpolicy.x86_64 2.9-1.el8 @anaconda
  • chkconfig.x86_64 1.19.2-1.el8 @baseos
  • chrony.x86_64 4.5-1.el8 @baseos
  • clevis.x86_64 15-15.el8 @appstream
  • clevis-luks.x86_64 15-15.el8 @appstream
  • cockpit.x86_64 310.3-1.el8_10 @baseos
  • cockpit-bridge.x86_64 310.3-1.el8_10 @baseos
  • cockpit-packagekit.noarch 310.3-2.el8 @appstream
  • cockpit-podman.noarch 84.1-1.module+el8.10.0+1825+623b0c20 @appstream
  • cockpit-storaged.noarch 310.3-2.el8 @appstream
  • cockpit-system.noarch 310.3-1.el8_10 @baseos
  • cockpit-ws.x86_64 310.3-1.el8_10 @baseos
  • conmon.x86_64 3:2.1.10-1.module+el8.10.0+1815+5fe7415e @appstream
  • container-selinux.noarch 2:2.229.0-2.module+el8.10.0+1825+623b0c20 @appstream
  • containernetworking-plugins.x86_64 1:1.4.0-2.module+el8.10.0+1825+623b0c20 @appstream
  • containers-common.x86_64 2:1-81.module+el8.10.0+1825+623b0c20 @appstream
  • coreutils.x86_64 8.30-15.el8 @baseos
  • coreutils-common.x86_64 8.30-15.el8 @baseos
  • cpio.x86_64 2.12-11.el8 @anaconda
  • cracklib.x86_64 2.9.6-15.el8 @anaconda
  • cracklib-dicts.x86_64 2.9.6-15.el8 @anaconda
  • criu.x86_64 3.18-5.module+el8.10.0+1825+623b0c20 @appstream
  • cronie.x86_64 1.5.2-10.el8 @baseos
  • cronie-anacron.x86_64 1.5.2-10.el8 @baseos
  • crontabs.noarch 1.11-17.20190603git.el8 @anaconda
  • crypto-policies.noarch 20230731-1.git3177e06.el8 @baseos
  • crypto-policies-scripts.noarch 20230731-1.git3177e06.el8 @baseos
  • cryptsetup.x86_64 2.3.7-7.el8 @baseos
  • cryptsetup-libs.x86_64 2.3.7-7.el8 @baseos
  • curl.x86_64 7.61.1-34.el8 @baseos
  • cyrus-sasl-gssapi.x86_64 2.1.27-6.el8_5 @anaconda
  • cyrus-sasl-lib.x86_64 2.1.27-6.el8_5 @anaconda
  • cyrus-sasl-plain.x86_64 2.1.27-6.el8_5 @anaconda
  • dbus.x86_64 1:1.12.8-26.el8 @baseos
  • dbus-common.noarch 1:1.12.8-26.el8 @baseos
  • dbus-daemon.x86_64 1:1.12.8-26.el8 @baseos
  • dbus-glib.x86_64 0.110-2.el8 @anaconda
  • dbus-libs.x86_64 1:1.12.8-26.el8 @baseos
  • dbus-tools.x86_64 1:1.12.8-26.el8 @baseos
  • dejavu-fonts-common.noarch 2.35-7.el8 @anaconda
  • dejavu-sans-mono-fonts.noarch 2.35-7.el8 @anaconda
  • desktop-file-utils.x86_64 0.26-1.el8 @appstream
  • device-mapper.x86_64 8:1.02.181-14.el8 @baseos
  • device-mapper-event.x86_64 8:1.02.181-14.el8 @baseos
  • device-mapper-event-libs.x86_64 8:1.02.181-14.el8 @baseos
  • device-mapper-libs.x86_64 8:1.02.181-14.el8 @baseos
  • device-mapper-multipath.x86_64 0.8.4-41.el8 @baseos
  • device-mapper-multipath-libs.x86_64 0.8.4-41.el8 @baseos
  • device-mapper-persistent-data.x86_64 0.9.0-7.el8 @anaconda
  • dhcp-client.x86_64 12:4.3.6-50.el8_10 @baseos
  • dhcp-common.noarch 12:4.3.6-50.el8_10 @baseos
  • dhcp-libs.x86_64 12:4.3.6-50.el8_10 @baseos
  • diffutils.x86_64 3.6-6.el8 @anaconda
  • dmidecode.x86_64 1:3.5-1.el8 @baseos
  • dnf.noarch 4.7.0-20.el8 @baseos
  • dnf-data.noarch 4.7.0-20.el8 @baseos
  • dnf-plugins-core.noarch 4.0.21-25.el8 @baseos
  • dnsmasq.x86_64 2.79-33.el8_10 @appstream
  • dos2unix.x86_64 7.4.0-3.el8 @anaconda
  • dosfstools.x86_64 4.1-6.el8 @anaconda
  • dracut.x86_64 049-233.git20240115.el8 @baseos
  • dracut-config-rescue.x86_64 049-233.git20240115.el8 @baseos
  • dracut-network.x86_64 049-233.git20240115.el8 @baseos
  • dracut-squash.x86_64 049-233.git20240115.el8 @baseos
  • e2fsprogs.x86_64 1.45.6-5.el8 @anaconda
  • e2fsprogs-libs.x86_64 1.45.6-5.el8 @anaconda
  • ed.x86_64 1.14.2-4.el8 @anaconda
  • elfutils-debuginfod-client.x86_64 0.190-2.el8 @baseos
  • elfutils-default-yama-scope.noarch 0.190-2.el8 @baseos
  • elfutils-libelf.x86_64 0.190-2.el8 @baseos
  • elfutils-libs.x86_64 0.190-2.el8 @baseos
  • emacs-filesystem.noarch 1:26.1-11.el8 @baseos
  • ethtool.x86_64 2:5.13-2.el8 @anaconda
  • expat.x86_64 2.2.5-13.el8_10 @baseos
  • file.x86_64 5.33-26.el8 @baseos
  • file-libs.x86_64 5.33-26.el8 @baseos
  • filesystem.x86_64 3.8-6.el8 @anaconda
  • findutils.x86_64 1:4.6.0-22.el8 @baseos
  • firewalld.noarch 0.9.11-4.el8 @baseos
  • firewalld-filesystem.noarch 0.9.11-4.el8 @baseos
  • fontconfig.x86_64 2.13.1-4.el8 @anaconda
  • fontpackages-filesystem.noarch 1.44-22.el8 @anaconda
  • fprintd.x86_64 1.90.9-2.el8 @AppStream
  • fprintd-pam.x86_64 1.90.9-2.el8 @AppStream
  • freetype.x86_64 2.9.1-9.el8 @anaconda
  • fstrm.x86_64 0.6.1-3.el8 @AppStream
  • fuse-common.x86_64 3.3.0-18.el8 @baseos
  • fuse-libs.x86_64 2.9.7-18.el8 @baseos
  • fuse-overlayfs.x86_64 1.13-1.module+el8.10.0+1825+623b0c20 @appstream
  • fuse3.x86_64 3.3.0-18.el8 @baseos
  • fuse3-libs.x86_64 3.3.0-18.el8 @baseos
  • gawk.x86_64 4.2.1-4.el8 @anaconda
  • gdbm.x86_64 1:1.18-2.el8 @anaconda
  • gdbm-libs.x86_64 1:1.18-2.el8 @anaconda
  • gdisk.x86_64 1.0.3-11.el8 @anaconda
  • gdk-pixbuf2.x86_64 2.36.12-6.el8_10 @baseos
  • geolite2-city.noarch 20180605-1.el8 @AppStream
  • geolite2-country.noarch 20180605-1.el8 @AppStream
  • gettext.x86_64 0.19.8.1-17.el8 @anaconda
  • gettext-libs.x86_64 0.19.8.1-17.el8 @anaconda
  • glib-networking.x86_64 2.56.1-1.1.el8 @anaconda
  • glib2.x86_64 2.56.4-164.el8 @baseos
  • glibc.x86_64 2.28-251.el8_10.2 @baseos
  • glibc-common.x86_64 2.28-251.el8_10.2 @baseos
  • glibc-gconv-extra.x86_64 2.28-251.el8_10.2 @baseos
  • glibc-langpack-en.x86_64 2.28-251.el8_10.2 @baseos
  • gmp.x86_64 1:6.1.2-12.el8 @baseos
  • gnupg2.x86_64 2.2.20-3.el8_6 @anaconda
  • gnupg2-smime.x86_64 2.2.20-3.el8_6 @anaconda
  • gnutls.x86_64 3.6.16-8.el8_10.2 @baseos
  • gobject-introspection.x86_64 1.56.1-1.el8 @anaconda
  • gpgme.x86_64 1.13.1-12.el8 @baseos
  • gpm-libs.x86_64 1.20.7-17.el8 @AppStream
  • grep.x86_64 3.1-6.el8 @anaconda
  • groff-base.x86_64 1.22.3-18.el8 @anaconda
  • grub2-common.noarch 1:2.02-156.el8.rocky.0.1 @baseos
  • grub2-pc.x86_64 1:2.02-156.el8.rocky.0.1 @baseos
  • grub2-pc-modules.noarch 1:2.02-156.el8.rocky.0.1 @baseos
  • grub2-tools.x86_64 1:2.02-156.el8.rocky.0.1 @baseos
  • grub2-tools-efi.x86_64 1:2.02-156.el8.rocky.0.1 @baseos
  • grub2-tools-extra.x86_64 1:2.02-156.el8.rocky.0.1 @baseos
  • grub2-tools-minimal.x86_64 1:2.02-156.el8.rocky.0.1 @baseos
  • grubby.x86_64 8.40-49.el8 @baseos
  • gsettings-desktop-schemas.x86_64 3.32.0-6.el8 @anaconda
  • gzip.x86_64 1.9-13.el8_5 @anaconda
  • hardlink.x86_64 1:1.3-6.el8 @anaconda
  • hdparm.x86_64 9.54-4.el8 @anaconda
  • hostname.x86_64 3.20-6.el8 @anaconda
  • hwdata.noarch 0.314-8.22.el8 @baseos
  • ima-evm-utils.x86_64 1.3.2-12.el8 @anaconda
  • info.x86_64 6.5-7.el8 @anaconda
  • initscripts.x86_64 10.00.18-1.el8 @anaconda
  • ipcalc.x86_64 0.2.4-4.el8 @baseos
  • iproute.x86_64 6.2.0-6.el8_10 @baseos
  • iprutils.x86_64 2.4.19-1.el8 @anaconda
  • ipset.x86_64 7.1-1.el8 @anaconda
  • ipset-libs.x86_64 7.1-1.el8 @anaconda
  • iptables.x86_64 1.8.5-11.el8 @baseos
  • iptables-ebtables.x86_64 1.8.5-11.el8 @baseos
  • iptables-libs.x86_64 1.8.5-11.el8 @baseos
  • iptstate.x86_64 2.2.6-6.el8 @anaconda
  • iputils.x86_64 20180629-11.el8 @baseos
  • irqbalance.x86_64 2:1.9.2-1.el8 @baseos
  • iscsi-initiator-utils.x86_64 6.2.1.4-8.git095f59c.el8_8 @baseos
  • iscsi-initiator-utils-iscsiuio.x86_64 6.2.1.4-8.git095f59c.el8_8 @baseos
  • isns-utils-libs.x86_64 0.99-1.el8 @anaconda
  • iwl100-firmware.noarch 39.31.5.1-121.el8.1 @baseos
  • iwl1000-firmware.noarch 1:39.31.5.1-121.el8.1 @baseos
  • iwl105-firmware.noarch 18.168.6.1-121.el8.1 @baseos
  • iwl135-firmware.noarch 18.168.6.1-121.el8.1 @baseos
  • iwl2000-firmware.noarch 18.168.6.1-121.el8.1 @baseos
  • iwl2030-firmware.noarch 18.168.6.1-121.el8.1 @baseos
  • iwl3160-firmware.noarch 1:25.30.13.0-121.el8.1 @baseos
  • iwl5000-firmware.noarch 8.83.5.1_1-121.el8.1 @baseos
  • iwl5150-firmware.noarch 8.24.2.2-121.el8.1 @baseos
  • iwl6000-firmware.noarch 9.221.4.1-121.el8.1 @baseos
  • iwl6000g2a-firmware.noarch 18.168.6.1-121.el8.1 @baseos
  • iwl6000g2b-firmware.noarch 18.168.6.1-121.el8.1 @baseos
  • iwl6050-firmware.noarch 41.28.5.1-121.el8.1 @baseos
  • iwl7260-firmware.noarch 1:25.30.13.0-121.el8.1 @baseos
  • jansson.x86_64 2.14-1.el8 @anaconda
  • jimtcl.x86_64 0.77-6.el8.1 @anaconda
  • jose.x86_64 10-2.el8 @AppStream
  • jq.x86_64 1.6-8.el8 @appstream
  • json-c.x86_64 0.13.1-3.el8 @anaconda
  • json-glib.x86_64 1.4.4-1.el8 @anaconda
  • kbd.x86_64 2.0.4-11.el8 @baseos
  • kbd-legacy.noarch 2.0.4-11.el8 @baseos
  • kbd-misc.noarch 2.0.4-11.el8 @baseos
  • kernel.x86_64 4.18.0-425.3.1.el8 @anaconda
  • kernel.x86_64 4.18.0-425.19.2.el8_7 @baseos
  • kernel.x86_64 4.18.0-553.el8_10 @baseos
  • kernel-core.x86_64 4.18.0-425.3.1.el8 @anaconda
  • kernel-core.x86_64 4.18.0-425.19.2.el8_7 @baseos
  • kernel-core.x86_64 4.18.0-553.el8_10 @baseos
  • kernel-modules.x86_64 4.18.0-425.3.1.el8 @anaconda
  • kernel-modules.x86_64 4.18.0-425.19.2.el8_7 @baseos
  • kernel-modules.x86_64 4.18.0-553.el8_10 @baseos
  • kernel-tools.x86_64 4.18.0-553.el8_10 @baseos
  • kernel-tools-libs.x86_64 4.18.0-553.el8_10 @baseos
  • kexec-tools.x86_64 2.0.26-14.el8 @baseos
  • keyutils-libs.x86_64 1.5.10-9.el8 @anaconda
  • kmod.x86_64 25-20.el8 @baseos
  • kmod-kvdo.x86_64 6.2.8.7-94.el8 @baseos
  • kmod-libs.x86_64 25-20.el8 @baseos
  • kpartx.x86_64 0.8.4-41.el8 @baseos
  • kpatch.noarch 0.9.7-2.el8 @baseos
  • kpatch-dnf.noarch 0.9.7_0.4-2.el8 @baseos
  • krb5-libs.x86_64 1.18.2-27.el8_10 @baseos
  • langpacks-en.noarch 1.0-12.el8 @AppStream
  • ledmon.x86_64 0.97-1.el8 @baseos
  • less.x86_64 530-2.el8_9 @baseos
  • libX11.x86_64 1.6.8-8.el8 @appstream
  • libX11-common.noarch 1.6.8-8.el8 @appstream
  • libXau.x86_64 1.0.9-3.el8 @AppStream
  • libXext.x86_64 1.3.4-1.el8 @AppStream
  • libXrender.x86_64 0.9.10-7.el8 @AppStream
  • libacl.x86_64 2.2.53-3.el8 @baseos
  • libaio.x86_64 0.3.112-1.el8 @anaconda
  • libappstream-glib.x86_64 0.7.14-3.el8 @anaconda
  • libarchive.x86_64 3.3.3-5.el8 @baseos
  • libassuan.x86_64 2.5.1-3.el8 @anaconda
  • libatasmart.x86_64 0.19-14.el8 @AppStream
  • libattr.x86_64 2.4.48-3.el8 @anaconda
  • libbasicobjects.x86_64 0.1.1-40.el8 @anaconda
  • libblkid.x86_64 2.32.1-46.el8 @baseos
  • libblockdev.x86_64 2.28-6.el8 @appstream
  • libblockdev-crypto.x86_64 2.28-6.el8 @appstream
  • libblockdev-fs.x86_64 2.28-6.el8 @appstream
  • libblockdev-loop.x86_64 2.28-6.el8 @appstream
  • libblockdev-lvm.x86_64 2.28-6.el8 @appstream
  • libblockdev-mdraid.x86_64 2.28-6.el8 @appstream
  • libblockdev-part.x86_64 2.28-6.el8 @appstream
  • libblockdev-swap.x86_64 2.28-6.el8 @appstream
  • libblockdev-utils.x86_64 2.28-6.el8 @appstream
  • libbpf.x86_64 0.5.0-1.el8 @anaconda
  • libbytesize.x86_64 1.4-3.el8 @AppStream
  • libcap.x86_64 2.48-6.el8_9 @baseos
  • libcap-ng.x86_64 0.7.11-1.el8 @anaconda
  • libcollection.x86_64 0.7.0-40.el8 @anaconda
  • libcom_err.x86_64 1.45.6-5.el8 @anaconda
  • libcomps.x86_64 0.1.18-1.el8 @anaconda
  • libconfig.x86_64 1.5-9.el8 @anaconda
  • libcroco.x86_64 0.6.12-4.el8_2.1 @anaconda
  • libcurl.x86_64 7.61.1-34.el8 @baseos
  • libdaemon.x86_64 0.14-15.el8 @anaconda
  • libdb.x86_64 5.3.28-42.el8_4 @anaconda
  • libdb-utils.x86_64 5.3.28-42.el8_4 @anaconda
  • libdhash.x86_64 0.5.0-40.el8 @anaconda
  • libdnf.x86_64 0.63.0-19.el8 @baseos
  • libedit.x86_64 3.1-23.20170329cvs.el8 @anaconda
  • libertas-usb8388-firmware.noarch 2:20240111-121.gitb3132c18.el8 @baseos
  • libestr.x86_64 0.1.10-3.el8 @AppStream
  • libevent.x86_64 2.1.8-5.el8 @anaconda
  • libfastjson.x86_64 0.99.9-2.el8 @appstream
  • libfdisk.x86_64 2.32.1-46.el8 @baseos
  • libffi.x86_64 3.1-24.el8 @baseos
  • libfprint.x86_64 1.90.7-1.el8 @AppStream
  • libgcc.x86_64 8.5.0-22.el8_10 @baseos
  • libgcrypt.x86_64 1.8.5-7.el8_6 @anaconda
  • libgomp.x86_64 8.5.0-22.el8_10 @baseos
  • libgpg-error.x86_64 1.31-1.el8 @anaconda
  • libgudev.x86_64 232-4.el8 @anaconda
  • libgusb.x86_64 0.3.0-1.el8 @anaconda
  • libibverbs.x86_64 48.0-1.el8 @baseos
  • libicu.x86_64 60.3-2.el8_1 @anaconda
  • libidn2.x86_64 2.2.0-1.el8 @anaconda
  • libini_config.x86_64 1.3.1-40.el8 @anaconda
  • libipa_hbac.x86_64 2.9.4-3.el8_10 @baseos
  • libjose.x86_64 10-2.el8 @AppStream
  • libkcapi.x86_64 1.4.0-2.el8 @baseos
  • libkcapi-hmaccalc.x86_64 1.4.0-2.el8 @baseos
  • libksba.x86_64 1.3.5-9.el8_7 @baseos
  • libldb.x86_64 2.8.0-0.el8 @baseos
  • libluksmeta.x86_64 9-4.el8 @AppStream
  • libmaxminddb.x86_64 1.2.0-10.el8_9.1 @appstream
  • libmetalink.x86_64 0.1.3-7.el8 @anaconda
  • libmnl.x86_64 1.0.4-6.el8 @anaconda
  • libmodman.x86_64 2.0.1-17.el8 @anaconda
  • libmodulemd.x86_64 2.13.0-1.el8 @anaconda
  • libmount.x86_64 2.32.1-46.el8 @baseos
  • libndp.x86_64 1.7-6.el8 @anaconda
  • libnet.x86_64 1.1.6-15.el8 @AppStream
  • libnetfilter_conntrack.x86_64 1.0.6-5.el8 @anaconda
  • libnfnetlink.x86_64 1.0.1-13.el8 @anaconda
  • libnfsidmap.x86_64 1:2.3.3-59.el8 @baseos
  • libnftnl.x86_64 1.2.2-3.el8 @baseos
  • libnghttp2.x86_64 1.33.0-5.el8_8 @baseos
  • libnl3.x86_64 3.7.0-1.el8 @anaconda
  • libnl3-cli.x86_64 3.7.0-1.el8 @anaconda
  • libnsl2.x86_64 1.2.0-2.20180605git4a062cf.el8 @anaconda
  • libpath_utils.x86_64 0.2.1-40.el8 @anaconda
  • libpcap.x86_64 14:1.9.1-5.el8 @anaconda
  • libpipeline.x86_64 1.5.0-2.el8 @anaconda
  • libpkgconf.x86_64 1.4.2-1.el8 @anaconda
  • libpng.x86_64 2:1.6.34-5.el8 @anaconda
  • libproxy.x86_64 0.4.15-5.2.el8 @anaconda
  • libpsl.x86_64 0.20.2-6.el8 @anaconda
  • libpwquality.x86_64 1.4.4-6.el8 @baseos
  • libref_array.x86_64 0.1.5-40.el8 @anaconda
  • librelp.x86_64 1.9.0-1.el8 @AppStream
  • librepo.x86_64 1.14.2-5.el8 @baseos
  • libreport-filesystem.x86_64 2.9.5-15.el8.rocky.6.3 @anaconda
  • libseccomp.x86_64 2.5.2-1.el8 @anaconda
  • libsecret.x86_64 0.18.6-1.el8.0.2 @anaconda
  • libselinux.x86_64 2.9-8.el8 @baseos
  • libselinux-utils.x86_64 2.9-8.el8 @baseos
  • libsemanage.x86_64 2.9-9.el8_6 @baseos
  • libsepol.x86_64 2.9-3.el8 @anaconda
  • libsigsegv.x86_64 2.11-5.el8 @anaconda
  • libslirp.x86_64 4.4.0-2.module+el8.10.0+1825+623b0c20 @appstream
  • libsmartcols.x86_64 2.32.1-46.el8 @baseos
  • libsmbclient.x86_64 4.19.4-3.el8 @baseos
  • libsolv.x86_64 0.7.20-6.el8 @baseos
  • libsoup.x86_64 2.62.3-5.el8 @baseos
  • libss.x86_64 1.45.6-5.el8 @anaconda
  • libssh.x86_64 0.9.6-14.el8 @baseos
  • libssh-config.noarch 0.9.6-14.el8 @baseos
  • libsss_autofs.x86_64 2.9.4-3.el8_10 @baseos
  • libsss_certmap.x86_64 2.9.4-3.el8_10 @baseos
  • libsss_idmap.x86_64 2.9.4-3.el8_10 @baseos
  • libsss_nss_idmap.x86_64 2.9.4-3.el8_10 @baseos
  • libsss_sudo.x86_64 2.9.4-3.el8_10 @baseos
  • libstdc++.x86_64 8.5.0-22.el8_10 @baseos
  • libstemmer.x86_64 0-10.585svn.el8 @anaconda
  • libstoragemgmt.x86_64 1.9.1-7.el8 @baseos
  • libsysfs.x86_64 2.1.0-25.el8 @anaconda
  • libtalloc.x86_64 2.4.1-0.el8 @baseos
  • libtasn1.x86_64 4.13-4.el8_7 @baseos
  • libtdb.x86_64 1.4.9-0.el8 @baseos
  • libteam.x86_64 1.31-4.el8 @baseos
  • libtevent.x86_64 0.16.0-0.el8 @baseos
  • libtirpc.x86_64 1.1.4-11.el8 @baseos
  • libudisks2.x86_64 2.9.0-16.el8 @appstream
  • libunistring.x86_64 0.9.9-3.el8 @anaconda
  • libusbx.x86_64 1.0.23-4.el8 @anaconda
  • libuser.x86_64 0.62-25.el8 @baseos
  • libutempter.x86_64 1.1.6-14.el8 @anaconda
  • libuuid.x86_64 2.32.1-46.el8 @baseos
  • libuv.x86_64 1:1.41.1-1.el8_4 @appstream
  • libverto.x86_64 0.3.2-2.el8 @anaconda
  • libwbclient.x86_64 4.19.4-3.el8 @baseos
  • libxcb.x86_64 1.13.1-1.el8 @AppStream
  • libxcrypt.x86_64 4.1.1-6.el8 @anaconda
  • libxkbcommon.x86_64 0.9.1-1.el8 @AppStream
  • libxml2.x86_64 2.9.7-18.el8_9 @baseos
  • libxslt.x86_64 1.1.32-6.el8 @anaconda
  • libyaml.x86_64 0.1.7-5.el8 @anaconda
  • libzstd.x86_64 1.4.4-1.el8 @anaconda
  • linux-firmware.noarch 20240111-121.gitb3132c18.el8 @baseos
  • lm_sensors-libs.x86_64 3.4.0-23.20180522git70f7e08.el8 @baseos
  • lmdb-libs.x86_64 0.9.24-2.el8 @baseos
  • logrotate.x86_64 3.14.0-6.el8 @baseos
  • lshw.x86_64 B.02.19.2-6.el8 @anaconda
  • lsof.x86_64 4.93.2-1.el8 @anaconda
  • lsscsi.x86_64 0.32-3.el8 @anaconda
  • lua-libs.x86_64 5.3.4-12.el8 @anaconda
  • luksmeta.x86_64 9-4.el8 @AppStream
  • lvm2.x86_64 8:2.03.14-14.el8 @baseos
  • lvm2-libs.x86_64 8:2.03.14-14.el8 @baseos
  • lz4-libs.x86_64 1.8.3-3.el8_4 @anaconda
  • lzo.x86_64 2.08-14.el8 @anaconda
  • mailcap.noarch 2.1.48-3.el8 @anaconda
  • man-db.x86_64 2.7.6.1-18.el8 @anaconda
  • man-pages.x86_64 4.15-7.el8 @anaconda
  • man-pages-overrides.noarch 8.9.0.0-1.el8 @appstream
  • mcelog.x86_64 3:195-0.el8 @baseos
  • mdadm.x86_64 4.2-14.el8_10 @baseos
  • memstrack.x86_64 0.2.5-2.el8 @baseos
  • microcode_ctl.x86_64 4:20230808-2.20231009.1.el8_9 @baseos
  • mlocate.x86_64 0.26-20.el8 @anaconda
  • mozjs60.x86_64 60.9.0-4.el8 @anaconda
  • mpfr.x86_64 3.1.6-1.el8 @anaconda
  • mtr.x86_64 2:0.92-3.el8 @anaconda
  • nano.x86_64 2.9.8-1.el8 @anaconda
  • ncurses.x86_64 6.1-10.20180224.el8 @baseos
  • ncurses-base.noarch 6.1-10.20180224.el8 @baseos
  • ncurses-libs.x86_64 6.1-10.20180224.el8 @baseos
  • net-tools.x86_64 2.0-0.52.20160912git.el8 @anaconda
  • nettle.x86_64 3.4.1-7.el8 @anaconda
  • newt.x86_64 0.52.20-11.el8 @anaconda
  • nftables.x86_64 1:1.0.4-4.el8 @baseos
  • nmap-ncat.x86_64 2:7.92-1.el8 @appstream
  • npth.x86_64 1.5-4.el8 @anaconda
  • nspr.x86_64 4.35.0-1.el8_8 @appstream
  • nss.x86_64 3.90.0-7.el8_10 @appstream
  • nss-softokn.x86_64 3.90.0-7.el8_10 @appstream
  • nss-softokn-freebl.x86_64 3.90.0-7.el8_10 @appstream
  • nss-sysinit.x86_64 3.90.0-7.el8_10 @appstream
  • nss-util.x86_64 3.90.0-7.el8_10 @appstream
  • numactl-libs.x86_64 2.0.16-4.el8 @baseos
  • nvme-cli.x86_64 1.16-9.el8 @baseos
  • oddjob.x86_64 0.34.7-3.el8 @appstream
  • oddjob-mkhomedir.x86_64 0.34.7-3.el8 @appstream
  • oniguruma.x86_64 6.8.2-3.el8 @appstream
  • openldap.x86_64 2.4.46-18.el8 @anaconda
  • openssh.x86_64 8.0p1-24.el8 @baseos
  • openssh-clients.x86_64 8.0p1-24.el8 @baseos
  • openssh-server.x86_64 8.0p1-24.el8 @baseos
  • openssl.x86_64 1:1.1.1k-12.el8_9 @baseos
  • openssl-libs.x86_64 1:1.1.1k-12.el8_9 @baseos
  • openssl-pkcs11.x86_64 0.4.10-3.el8 @baseos
  • os-prober.x86_64 1.74-9.el8 @anaconda
  • p11-kit.x86_64 0.23.22-2.el8 @baseos
  • p11-kit-trust.x86_64 0.23.22-2.el8 @baseos
  • pam.x86_64 1.3.1-33.el8 @baseos
  • parted.x86_64 3.2-39.el8 @anaconda
  • passwd.x86_64 0.80-4.el8 @anaconda
  • pciutils.x86_64 3.7.0-3.el8 @baseos
  • pciutils-libs.x86_64 3.7.0-3.el8 @baseos
  • pcp.x86_64 5.3.7-20.el8_10 @appstream
  • pcp-conf.x86_64 5.3.7-20.el8_10 @appstream
  • pcp-libs.x86_64 5.3.7-20.el8_10 @appstream
  • pcp-selinux.x86_64 5.3.7-20.el8_10 @appstream
  • pcp-system-tools.x86_64 5.3.7-20.el8_10 @appstream
  • pcre.x86_64 8.42-6.el8 @anaconda
  • pcre2.x86_64 10.32-3.el8_6 @anaconda
  • pigz.x86_64 2.4-4.el8 @anaconda
  • pinentry.x86_64 1.1.0-2.el8 @AppStream
  • pinfo.x86_64 0.6.10-18.el8 @AppStream
  • pixman.x86_64 0.38.4-4.el8 @appstream
  • pkgconf.x86_64 1.4.2-1.el8 @anaconda
  • pkgconf-m4.noarch 1.4.2-1.el8 @anaconda
  • pkgconf-pkg-config.x86_64 1.4.2-1.el8 @anaconda
  • platform-python.x86_64 3.6.8-62.el8_10.rocky.0 @baseos
  • platform-python-pip.noarch 9.0.3-24.el8.rocky.0 @baseos
  • platform-python-setuptools.noarch 39.2.0-7.el8 @baseos
  • plymouth.x86_64 0.9.4-11.20200615git1e36e30.el8 @AppStream
  • plymouth-core-libs.x86_64 0.9.4-11.20200615git1e36e30.el8 @AppStream
  • plymouth-scripts.x86_64 0.9.4-11.20200615git1e36e30.el8 @AppStream
  • podman.x86_64 4:4.9.4-1.module+el8.10.0+1825+623b0c20 @appstream
  • podman-catatonit.x86_64 4:4.9.4-1.module+el8.10.0+1825+623b0c20 @appstream
  • podman-gvproxy.x86_64 4:4.9.4-1.module+el8.10.0+1825+623b0c20 @appstream
  • podman-plugins.x86_64 4:4.9.4-1.module+el8.10.0+1825+623b0c20 @appstream
  • policycoreutils.x86_64 2.9-25.el8 @baseos
  • policycoreutils-python-utils.noarch 2.9-25.el8 @baseos
  • polkit.x86_64 0.115-15.el8_10.2 @baseos
  • polkit-libs.x86_64 0.115-15.el8_10.2 @baseos
  • polkit-pkla-compat.x86_64 0.1-12.el8 @anaconda
  • popt.x86_64 1.18-1.el8 @anaconda
  • prefixdevname.x86_64 0.1.0-6.el8 @anaconda
  • procps-ng.x86_64 3.3.15-14.el8 @baseos
  • protobuf-c.x86_64 1.3.0-8.el8 @appstream
  • psacct.x86_64 6.6.3-4.el8 @anaconda
  • psmisc.x86_64 23.1-5.el8 @anaconda
  • publicsuffix-list-dafsa.noarch 20180723-1.el8 @anaconda
  • python3-audit.x86_64 3.1.2-1.el8 @baseos
  • python3-bind.noarch 32:9.11.36-14.el8_10 @appstream
  • python3-cairo.x86_64 1.16.3-6.el8 @AppStream
  • python3-chardet.noarch 3.0.4-7.el8 @anaconda
  • python3-dateutil.noarch 1:2.6.1-6.el8 @anaconda
  • python3-dbus.x86_64 1.2.4-15.el8 @anaconda
  • python3-decorator.noarch 4.2.1-2.el8 @anaconda
  • python3-distro.noarch 1.4.0-2.module+el8.10.0+1592+61442852 @appstream
  • python3-dnf.noarch 4.7.0-20.el8 @baseos
  • python3-dnf-plugins-core.noarch 4.0.21-25.el8 @baseos
  • python3-firewall.noarch 0.9.11-4.el8 @baseos
  • python3-gobject.x86_64 3.28.3-2.el8 @AppStream
  • python3-gobject-base.x86_64 3.28.3-2.el8 @anaconda
  • python3-gpg.x86_64 1.13.1-12.el8 @baseos
  • python3-hawkey.x86_64 0.63.0-19.el8 @baseos
  • python3-html5lib.noarch 1:0.999999999-6.el8 @AppStream
  • python3-idna.noarch 2.5-5.el8 @anaconda
  • python3-libcomps.x86_64 0.1.18-1.el8 @anaconda
  • python3-libdnf.x86_64 0.63.0-19.el8 @baseos
  • python3-libs.x86_64 3.6.8-62.el8_10.rocky.0 @baseos
  • python3-libselinux.x86_64 2.9-8.el8 @baseos
  • python3-libsemanage.x86_64 2.9-9.el8_6 @baseos
  • python3-libstoragemgmt.x86_64 1.9.1-7.el8 @baseos
  • python3-libxml2.x86_64 2.9.7-18.el8_9 @baseos
  • python3-linux-procfs.noarch 0.7.3-1.el8 @baseos
  • python3-lxml.x86_64 4.2.3-4.el8 @AppStream
  • python3-magic.noarch 5.33-26.el8 @baseos
  • python3-nftables.x86_64 1:1.0.4-4.el8 @baseos
  • python3-pcp.x86_64 5.3.7-20.el8_10 @appstream
  • python3-perf.x86_64 4.18.0-553.el8_10 @baseos
  • python3-pexpect.noarch 4.3.1-3.el8 @AppStream
  • python3-pip.noarch 9.0.3-24.el8.rocky.0 @appstream
  • python3-pip-wheel.noarch 9.0.3-24.el8.rocky.0 @baseos
  • python3-ply.noarch 3.9-9.el8 @anaconda
  • python3-policycoreutils.noarch 2.9-25.el8 @baseos
  • python3-psutil.x86_64 5.4.3-11.el8 @AppStream
  • python3-ptyprocess.noarch 0.5.2-4.el8 @AppStream
  • python3-pydbus.noarch 0.6.0-5.el8 @AppStream
  • python3-pysocks.noarch 1.6.8-3.el8 @anaconda
  • python3-pyudev.noarch 0.21.0-7.el8 @anaconda
  • python3-pyyaml.x86_64 3.12-12.el8 @anaconda
  • python3-requests.noarch 2.20.0-4.el8 @baseos
  • python3-rpm.x86_64 4.14.3-31.el8 @baseos
  • python3-setools.x86_64 4.3.0-5.el8 @baseos
  • python3-setuptools.noarch 39.2.0-7.el8 @baseos
  • python3-setuptools-wheel.noarch 39.2.0-7.el8 @baseos
  • python3-six.noarch 1.11.0-8.el8 @anaconda
  • python3-slip.noarch 0.6.4-13.el8 @anaconda
  • python3-slip-dbus.noarch 0.6.4-13.el8 @anaconda
  • python3-sssdconfig.noarch 2.9.4-3.el8_10 @baseos
  • python3-syspurpose.x86_64 1.28.42-1.el8.rocky.0.2 @baseos
  • python3-systemd.x86_64 234-8.el8 @anaconda
  • python3-tracer.noarch 1.1-1.el8 @appstream
  • python3-unbound.x86_64 1.16.2-5.el8_9.6 @appstream
  • python3-urllib3.noarch 1.24.2-7.el8 @baseos
  • python3-webencodings.noarch 0.5.1-6.el8 @AppStream
  • python36.x86_64 3.6.8-39.module+el8.10.0+1592+61442852 @appstream
  • quota.x86_64 1:4.04-14.el8 @anaconda
  • quota-nls.noarch 1:4.04-14.el8 @anaconda
  • readline.x86_64 7.0-10.el8 @anaconda
  • realmd.x86_64 0.17.1-2.el8 @baseos
  • rocky-gpg-keys.noarch 8.10-1.8.el8 @baseos
  • rocky-logos.x86_64 86.3-1.el8 @anaconda
  • rocky-release.noarch 8.10-1.8.el8 @baseos
  • rocky-repos.noarch 8.10-1.8.el8 @baseos
  • rootfiles.noarch 8.1-22.el8 @anaconda
  • rpm.x86_64 4.14.3-31.el8 @baseos
  • rpm-build-libs.x86_64 4.14.3-31.el8 @baseos
  • rpm-libs.x86_64 4.14.3-31.el8 @baseos
  • rpm-plugin-selinux.x86_64 4.14.3-31.el8 @baseos
  • rpm-plugin-systemd-inhibit.x86_64 4.14.3-31.el8 @baseos
  • rsync.x86_64 3.1.3-19.e